When steam-proof version of the execution of the insulation on the surface of the insulations (about 12 cm from the edge) is a black stripe. Raw material from which made the insulation gives it life is no less than those applied roofing systems. The material is rot, mold and safe for human health. Dimensions – 1,5 x 50 m, the density of two types – 96 and 110 g / m ². Rolls are packaged in PEX insulation that helps prevent damage and deterioration.
The holes encountered in securing the insulation, you must close the connecting strip. If you do not comply with the above rules, then through the joints will leak, which quickly reduce the effect of the insulation. In this case any problems associated with condensation of moisture in the insulation, there will be channels of leakage of water vapor, heat and other troubles caused by unwanted condensation. When the installation of vapor tight barrier is done in flat roofs should be aware of the danger of damaging the insulation material, the adjacent top or bottom, so special attention should be paid to the order of layers or to provide separation layers. But in any case need to pay attention to the connection and seal. If YUTAFOL H is used in the sauna or another environment with a high temperature should be between the kinds of elements and the insulation put the insulation thickness of not less than 30 mm. To connect the blades need to use tape.
